Abstract
Mazkur maqolada sement hamirining reologik xususiyatlarini baholashda mini-konus (mini-slump) usulining qo‘llanilishi tahlil qilinadi. Usulning nazariy asoslari, tajriba o‘tkazish tartibi va o‘lchash natijalarini talqin qilish yondashuvlari ko‘rib chiqiladi. Mini-konus yordamida yoyilish diametrini aniqlash orqali oqish chegarasini bilvosita baholash imkoniyati asoslanadi. Metodning afzalliklari, sezgirligi va cheklovlari ilmiy nuqtai nazardan muhokama qilinadi. Tadqiqot natijalari mini-konus usuli sement hamirining reologik parametrlarini tezkor va iqtisodiy baholashda samarali vosita ekanligini ko‘rsatadi.References
1. H. Kemer, R. Bouras, M. Sonebi, N. Mesboua, and A. Benmounah, “Slump Test: A New Empirical Model for High Yield Stress Materials,” Journal of Applied Engineering Sciences, vol. 11, pp. 107–112, 2021.
2. M. Thiedeitz, T. Kränkel, and C. Gehlen, “Viscoelastoplastic classification of cementitious suspensions: transient and non-linear flow analysis in rotational and oscillatory shear flows,” Rheologica Acta, vol. 61, pp. 549–570, 2022.
3. E. L. Skare, Prediction of Rheological Properties of Filler Modified Cement Paste, PhD thesis, Technical University of Denmark, 2021.
4. D. Jiao, R. De Schryver, C. Shi, and G. De Schutter, “Thixotropic structural build-up of cement-based materials: A state-of-the-art review,” Cement and Concrete Composites,
2021. A. Straßer et al., “Fundamental Investigations on the Effect of Heat Exposure on the Rheological Behavior of Cement Paste,” Open Conference Proceedings, 2022.
5. L. S. C. Ko et al., “Rheology and Setting Control of Concrete for Digital Construction,” ACI Materials Journal, vol. 118, no. 6, 2021.
6. T. Ishida and K. Nakada, “Review of rheology in cement-based materials and its application to 3D printing,” Nihon Reoroji Gakkaishi, vol. 51, 2023.
7. L. R. M. Miranda et al., “Geometric Conformability of 3D Concrete Printing Mixtures,” Materials, vol. 16, 2023.
8. ASTM C143/C143M-20, Standard Test Method for Slump of Hydraulic-Cement Concrete, ASTM International, 2020.
9. N. Roussel and P. Coussot, “Fifty-cent rheometer for yield stress measurements,” Journal of Rheology, vol. 49, pp. 705–718, 2005.
10. V. Pashias, D. Vlassopoulos, and G. Fytas, “Yield stress measurements: Slump test revisited,” Journal of Rheology, vol. 40, pp. 1179–1189, 1996.
11. H. Tan et al., “Standardized mini-slump method for yield stress determination of cement pastes,” Materials, 2020.
12. R. Ferron, E. Koehler, and S. Shah, “Influence of mixing energy on cement paste rheology,” Cement and Concrete Research, 2007. 13.Yahia and K. Khayat, “Analytical models for estimating yield stress of cement paste,” Materials and Structures, 2001. 14.Nehdi and S. Rahman, “CFD modeling of mini-slump flow of cement pastes,” Materials, 2024.