Abstract
Ushbu ishda uglerod asosli sorbentning element tarkibi va termik parchalanish xususiyatlari o‘rganildi. Sorbent namunalarining element tarkibi rentgen- fluoresans tahlil usuli yordamida aniqlanib, asosiy komponent sifatida uglerodning yuqori miqdorda mavjudligi tasdiqlandi. Termogravimetrik (TG) tahlil orqali esa materialning harorat ta’sirida massasi o‘zgarishi, parchalanish bosqichlari va issiqlikka chidamlilik darajasi baholandi. Olingan natijalar sorbentning yuqori termik barqarorlikka ega ekanligini va uni yuqori haroratli jarayonlarda qo‘llash imkoniyatlarini ko‘rsatdi. Shuningdek, element tarkibi va termik xossalar o‘rtasidagi bog‘liqlik tahlil qilinib, sorbentning adsorbsion xususiyatlarini yaxshilashda muhim omillar aniqlandi.References
1. Davini P. Flue gas treatment by activated carbon obtained from oil-fired fly ash // Carbon N. Y.
2002. Vol. 40, №
11. P. 1973–1979. 2.Baker F.S. and others. Activated Carbon // Kirk-Othmer Encyclopedia of Chemical Technology. – 2000. 3.Heidarinejad Z. et al. Methods for preparation and activation of activated carbon: a review //Environmental Chemistry Letters. – 2020. – Т. 18. – №. 2. – С. 393-415. 4.Menéndez J.A., Phillips J., Xia B., Radovic L.R. On the modification and characterization of chemical surface properties of activated carbon: In the search of carbons with stable basic properties // Langmuir.
1996. Vol. 12, №
18. P. 4404–4410. 5.Khan W. A. et al. Eco‐Friendly and Green Biochar Sorbent–Extraction Techniques for Pharmaceuticals, Environmental, and Food Analysis—A Review //Journal of Separation Science. – 2025. – Т. 48. – №. 1. – С. e70074. 6.Wijitkosum S. Biochar derived from agricultural wastes and wood residues for sustainable agricultural and environmental applications //International Soil and Water Conservation Research. – 2022. – Т. 10. – №. 2. – С. 335-341. 7.Liu B. et al. Burning and adsorption characteristics of char obtained from pyrolysis of cotton stalk and rapeseed straw //Transactions of the Chinese Society of Agricultural Engineering. – 2014. – Т. 30. – №. 10. – С. 193-200.